Casco SCOTT 550 Stripes ECE
Modello : 268018
Caratteristiche principali
- Tecnologia MIPS®
- Tecnologia Conehead
- Sistema di ventilazione perfetto
- Ventilazione regolabile
- Tecnologia In-mold
1. Colore : deep blue
2. Taglia
CHF 300.00
Consegna entro 3-5 giorni lavorativi dallordine
Spedizione gratuita per ordini superiori ai CHF 149.00
Resi gratuiti entro 14 giorni
- Lo SCOTT 550 Stripes è un casco innovativo d’alta gamma che spinge oltre ogni limite gli standard di ventilazione e sicurezza. Dotato delle ultimissime novità in materia di sicurezza come il MIPS® Brain Protection System e la tecnologia Conehead, questo casco offre una protezione migliore riducendo gli effetti negativi delle forze rotazionali e radiali che si sviluppano a seguito di una caduta. Il sistema di gestione del raffreddamento offre la massima ventilazione utilizzando prese d’aria posizionate strategicamente su tutto il casco. Il risultato è un casco confortevole, sicuro e alla moda.
-
Costruzione
Tecnologia In-Mold -
Fit Sistema
No -
Caratteristiche
Areazione ottimizzata e personalizzabile
Imbottitura sagomata in 3D
Imbottitura e guanciali rimovibili e lavabili -
Taglia
XS-XXL
Cone-Head Technology™
CONEHEAD™ is a revolutionary method of molding EPS foam to increase the impact properties of helmets. The helmet is molded in two stages and features two parts in two different densities, with a unique conical interface.
How Conehead TechnologyTM works ?
There are two different densities of foam as well as two different foams with their own characteristics of recovery from impact and inter-foam bond strength. In a crash, the impact force pushing towards the head causes the cones to compress which creates lateral forces spreading sideways through the higher density outer foam layer. Impact energy/force is absorbed by this lateral motion. At the same time, the head is travelling in the opposite direction, compressing the base of the lower density cones and slowing the accelerating head. The result is lower G-force experience for your head.
The benefit: a lighter helmet + softer protective shock absorbing foam closer to your head.
MIPS® Safety System
The brain is typically more sensitive to rotational motion than linear motion because it has shear properties similar to water or gel. When different parts of the brain move relative to each other because of rotational motion, the tissues can stretch, which can cause concussions or other brain injuries.
Rotational motion is a common cause of concussions and more severe brain injury in oblique hits to the head. The Mips® safety system consists of a low friction layer mounted inside the helmet. In a crash, the low friction layer is designed to move slightly inside the helmet to help redirect forces away from the head. This is intended to help reduce the risk of brain injury.
A SAFETY SYSTEM THAT MIMICS THE BRAIN
Unlike traditional helmets, which are mainly designed and tested for straight impacts, the Mips® safety system’s low-friction layer mimics the brain’s own system for protection against rotational motion.
STRAIGHT VS ANGLED IMPACTS
Traditional helmets are designed for straight impacts, but most impacts are angled.
The low friction layer is designed to reduce the rotational force of angled impacts.
Trova l’ispirazione
