SCOTT 550 Hatch ECE Helmet
Modelo : 264412
Características Principales
- MIPS technology
- Conehead Technology
- Perfect ventilation system
- Adjustable ventilation
- In-mold technology
1. Color : black/orange
2. Talla
- The SCOTT 550 Hatch Helmet is an innovative, high-end helmet that pushes the limits of ventilation and safety. Equipped with the latest safety features such as MIPS® Brain Protection System and Conehead technology, this helmet offer riders increased protection by reducing the impacts of both rotational and radial forces respectively during a crash. The 550's class-leading, advanced cooling management system offers riders the best ventilation on the market by utilizing strategically placed vents throughout the helmet to maximize airflow. The result is a comfortable, safe and stylish helmet that helps you get your head in the game.
-
Construcción
In-Mold Technology -
Ajuste Sistema
No -
Características
Optimized & customisable ventilation
3D shaped foam
Removable and washable liner & cheek pads -
Tallas
XS-XXL
MIPS® Safety System
The brain is typically more sensitive to rotational motion than linear motion because it has shear properties similar to water or gel. When different parts of the brain move relative to each other because of rotational motion, the tissues can stretch, which can cause concussions or other brain injuries.
Rotational motion is a common cause of concussions and more severe brain injury in oblique hits to the head. The Mips® safety system consists of a low friction layer mounted inside the helmet. In a crash, the low friction layer is designed to move slightly inside the helmet to help redirect forces away from the head. This is intended to help reduce the risk of brain injury.
A SAFETY SYSTEM THAT MIMICS THE BRAIN
Unlike traditional helmets, which are mainly designed and tested for straight impacts, the Mips® safety system’s low-friction layer mimics the brain’s own system for protection against rotational motion.
STRAIGHT VS ANGLED IMPACTS
Traditional helmets are designed for straight impacts, but most impacts are angled.
The low friction layer is designed to reduce the rotational force of angled impacts.
Cone-Head Technology™
CONEHEAD™ is a revolutionary method of molding EPS foam to increase the impact properties of helmets. The helmet is molded in two stages and features two parts in two different densities, with a unique conical interface.
How Conehead TechnologyTM works ?
There are two different densities of foam as well as two different foams with their own characteristics of recovery from impact and inter-foam bond strength. In a crash, the impact force pushing towards the head causes the cones to compress which creates lateral forces spreading sideways through the higher density outer foam layer. Impact energy/force is absorbed by this lateral motion. At the same time, the head is travelling in the opposite direction, compressing the base of the lower density cones and slowing the accelerating head. The result is lower G-force experience for your head.
The benefit: a lighter helmet + softer protective shock absorbing foam closer to your head.
Inspírate
