-
The SCOTT Centric Plus was designed and developed for our world-class road and mountain bike racers. We leveraged our extensive aerodynamic expertise to make one of the lightest and best ventilated helmets in its class. This was achieved through optimization of airflow on both the outside and the inside of the helmet. MIPS® Air provides the benefits of a MIPS® Brain Protection System and features a unique construction to further enhance ventilation.
-
Certification
PPE Cat. II according to EN 1078:2012+A1:2012 -
使用範囲
Cross-Country
Gravel
Road -
構造
In-Mold Technology, Polycarbonate Micro Shell -
フィットシステム
Halo 270
-
特長
Optimized Ventilation
New MIPS® Air Node Brain Protection System integrated in the padding
Lightweight construction -
サイズ
S, M, L -
重量
220g
Aero Optimized
Our Aero-optimized helmets were developed in cooperation with our Pro athletes. Designed and engineered to maximize aerodynamics, these helmets allow for that precious increase in rider speed. Extensive testing in the wind tunnels allowed us to minimize drag in multiple head positions.
MIPS® Safety System
The brain is typically more sensitive to rotational motion than linear motion because it has shear properties similar to water or gel. When different parts of the brain move relative to each other because of rotational motion, the tissues can stretch, which can cause concussions or other brain injuries.
Rotational motion is a common cause of concussions and more severe brain injury in oblique hits to the head. The Mips® safety system consists of a low friction layer mounted inside the helmet. In a crash, the low friction layer is designed to move slightly inside the helmet to help redirect forces away from the head. This is intended to help reduce the risk of brain injury.
A SAFETY SYSTEM THAT MIMICS THE BRAIN
Unlike traditional helmets, which are mainly designed and tested for straight impacts, the Mips® safety system’s low-friction layer mimics the brain’s own system for protection against rotational motion.
STRAIGHT VS ANGLED IMPACTS
Traditional helmets are designed for straight impacts, but most impacts are angled.
The low friction layer is designed to reduce the rotational force of angled impacts.
HALO Fit System
PC In-Mold Construction
During the in-mold manufacturing process, the outer shell of polycarbonate material is fused with the helmet’s impact-absorbent foam liner, creating a super-lightweight outer shell. With reduced weight and bulk surrounding the head, in-mold helmets are more comfortable than traditional helmets.
Test Winner - TOUR Magazin
“Also with Mips the helmet is very light, offers a lot of safety, the strap at the side leaves a lot of space for the ears, easy width adjustment. Overall winner!"
Test Winner – TOUR Magazin 09/2020
製品が使用されている様子を見る
インスピレーションを得る
